Rexrorh Hydraulic Valve 4wrpeh6c4b12L-2X/G24K0/A1m Proportional Directional Control Valve 4wrpe 4wref 4wree 4wreq

• Function: Flow Control
• Installation: Threaded Cartridge
• Drive: Hydraulic
• Type: Directly Operated Type
• Transport Package: Box
• Specification: Hydraulic proportional directional control valv
• Model NO.: 4WRPE 4WREF 4WREE 4WREQ
• Trademark: BTPS
• Origin: China
• Production Capacity: 1000/Month

Product Description

Hydraulic proportional directional control valve 4WREF 4WREE 4WREQ 4WREEM Series 4WREE 6 V04-22/G24K31/A1V

Product Description

Features

- Directly operated NG6 and 10 valves with positive overlap, actuated on both sides and position-controlled, symbol E or W
- Control solenoid with on-board electronics (OBE), deadband compensation and gain calibrated at the factory
- Electrical connection 6P+PE (standard), signal input: differential amplifier with interface A1 = ±10 V (F1 on request)
- For subplate attachment, mounting hole configuration NG6 to ISO 4401-03-02-0-94 and NG10 to ISO 4401-05-04-0-94 - Plug-in connectors to DIN 43563-AM6, see catalog section RE 08008 (order separately)
- Subplates as per catalog section RE 45053 and RE 45055 (order separately
Proportional valve is a new type of hydraulic control device. In the common pressure valve, flow valve and direction valve, the original control part is replaced by proportional electromagnet, and the pressure, flow or direction of oil flow is controlled remotely continuously and proportionally according to the input electrical signal. The proportional valve generally has pressure compensation performance, and the output pressure and flow can not be affected by the load change

Collecting valve		Maintaining valve
Throttle valve	Relief valve	Solenoid directional valve
Speed regulation valve	Pressure reducing valve	Manual reversing valve
Diverter valve	Pressure valve	Check valve
Flow valve	Cartridge valve	Hydraulic control one-way valve
Collecting valve	Stop valve	Solenoid valve
Pilot valve	Reverse check valve	Superposition valve
Direct acting relief valve	Pilot check valve	Directional valve
Pilot relief valve	Sequence valve	Pilot sequence valve
Pilot reducing valve	Balance valve	Direct acting sequence valve

 

 

Detailed Photos

 

 

Packaging & Shipping

Installation Instructions

Important Voltage supply 24 V DC nom, if voltage drops below 18 V DC, rapid shutdown resembling "Enable OFF" takes place internally. In addition, with the "mA signal" version: ID-E  3 mA - valve is active ID-E
2 mA - valve is deactivated. Electrical signals emitted via the trigger electronics (e.g. actual values) must not be used to shut down safetyrelevant machine functions! (Also see European Standard, "Technical Safety Requirements for Fluid-Powered Systems and Components - Hydraulics", EN 982